Mstp Configuration - Huawei Quidway S3900 Series Operation Manual

Operation Manual – MSTP
Quidway S3900 Series Ethernet Switches-Release 1510
<Quidway> system-view
[Quidway] interface Ethernet1/0/1
[Quidway-Ethernet1/0/1] stp point-to-point force-true

1.2.14 MSTP Configuration

I. Configuration procedure
Table 1-19 Enable MSTP in system view
Operation
Enter system view
Enable MSTP
Disable
specified ports
Table 1-20 Disable MSTP in Ethernet port view
Operation
Enter system view
Enable MSTP
Enter
view
system-view
stp enable
MSTP on
stp interface interface-list
disable
system-view
stp enable
Ethernet port
Interface
interface-number
Huawei Technologies Proprietary
Command
Command
interface-type
1-24
Chapter 1 MSTP Configuration
Description
—
Required
MSTP is disabled
default.
Optional
By default, MSTP
enabled on all ports after
you enable MSTP in system
view.
To enable a switch to
operate more flexibly, you
can disable MSTP
specific ports.
MSTP-disabled ports do not
participate in spanning tree
generation, this operation
saves CPU resources.
Description
—
Required
MSTP is disabled
default.
—
by
is
on
As
by