Configuring Trunk Port Attribute; Copying The Configuration Of A Port To Other Ports - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Port Basic Configuration
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Add the current hybrid
port to a specified
VLAN

1.2.6 Configuring Trunk Port Attribute

Table 1-8 Configure trunk port attribute
Enter system view
Enter Ethernet port view
Set the link type of the port to
trunk
Set the default VLAN ID for
the trunk port
Add the current trunk port to
a specified VLAN

1.2.7 Copying the Configuration of a Port to Other Ports

To make some other ports have the same configuration as that of a specific port, you
can copy the configuration of the specific port to the ports.
Specifically, the following types of port configuration can be copied from one port to
other ports: VLAN configuration, protocol-based VLAN configuration, LACP
configuration, QoS configuration, GARP configuration, STP configuration and initial
port configuration.
VALN configuration: includes IDs of the VLANs allowed on the port and the default
VLAN ID of the port;
Protocol-based VLAN configuration: includes IDs and indexes of the
protocol-based VLANs allowed on the port;
port
vlan-id-list
untagged }
Operation
Huawei Technologies Proprietary
Command
hybrid vlan
{ tagged |
Command
System-view
interface interface-type
interface-number
port link-type trunk
port trunk pvid vlan
vlan-id
port trunk permit vlan
{ vlan-id-list | all }
1-7
Chapter 1 Port Basic Configuration
Remarks
Optional
For a hybrid port, you can
configure to tag the packets
of specific VLANs, based on
which the packets of those
VLANs can be processed in
differently ways.
Remarks
—
—
Required
Optional
If no default VLAN ID is
set for a trunk port,
VLAN 1
default VLAN) is used
as the default VLAN of
the port.
Optional
(system