Configuring Tp - Huawei Quidway S3900 Series Operation Manual

Operation Manual - QoS&QoS Profile
Quidway S3900 Series Ethernet Switches-Release 1510
1.7.2 Configuration Procedure
Table 1-11 Configure rate limit on ports
Operation
Enter
view
Enter
port view
Configure
port-based
limit
Display
precedence of the
protocol packet
1.7.3 Configuration Example
Set rate limit in the outbound direction of Ethernet1/0/1 on the switch
The limit rate is 1 Mps (1024 kbps)
Configuration procedure:
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet1/0/1
[Quidway-Ethernet1/0/1] line-rate outbound 1024

1.8 Configuring TP

Refer to 1.1.8 TP for the introduction to TP.
Command
system
system-view
Ethernet interface interface-type
interface-number
line-rate { inbound |
rate
outbound } target-rate
the
display
protocol-priority
Huawei Technologies Proprietary
—
—
Required
target-rate: Total rate to limit
packet sending and receiving
on the port, in kbps. The
granularity of rate limit is 64
kbps. If the number you input is
in
(N+1)*64
number), the switch will set the
value
automatically
The
Ethernet ports is from 64 to
99,968
The rate range of Gigabit
Ethernet ports is in from 64 to
1,000,000
Optional
You can execute the display
command in any view
1-18
Chapter 1 QoS Configuration
Description
the range of N*64
(N is a natural
to (N+1)*64
rate range of 100M
to
kbps