Huawei Quidway S3900 Series Operation Manual page 305

Operation Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Table 3-8 Configure RIP to filter incoming/outgoing routes
Operation
Enter system view
Enter RIP view
Configure RIP to filter
incoming routes
Configure RIP to filter
outgoing routes
Note:
The filter-policy import command filters the RIP routes received from neighbors,
and the routes being filtered out will neither be added to the routing table nor be
advertised to any neighbors.
The filter-policy export command filters all the routes to be advertised, including
the routes imported by using the import-route command as well as RIP routes
learned from neighbors.
The filter-policy export command without the routing-protocol argument filters all
the routes to be advertised, including the routes imported by the import-route
command.
Command
system-view
rip
filter-policy { acl-number |
ip-prefix
[ gateway ip-prefix-name ] |
route-policy
route-policy-name } import
filter-policy
ip-prefix-name import
filter-policy { acl-number |
ip-prefix ip-prefix-name
export [ routing-protocol ]
filter-policy
route-policy-name export
Huawei Technologies Proprietary
3-8
Chapter 3 RIP Configuration
—
—
Required
ip-prefix-name
By default, RIP does
not filter any incoming
routes.
The gateway keyword
is used to filter the
incoming
gateway
advertised
specified address.
Required
}
By default, RIP does
not filter any outgoing
route-policy
routes.
Description
routes
from a