Mirroring Configuration Of S3900-Si - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Mirroring
Quidway S3900 Series Ethernet Switches

1.4 Mirroring Configuration of S3900-SI

For mirroring features, refer to section 1.1 "Overview".
1.4.1 Configuring Traffic Mirroring
The traffic mirroring configurations of S3900-SI are the same as those of S3900-EI.
Refer to section 1.3.1 "Configuring Traffic Mirroring" for details.
1.4.2 Configuring Port Mirroring
I. Configuration prerequisites
The source port is specified and whether the packets to be mirrored are inbound
or outbound is specified: inbound: only mirrors the packets received via the port;
outbound: only mirrors the packets sent by the port; both: mirrors the packets
received and sent by the port at the same time.
The destination port is specified.
II. Configuration procedure
Table 1-13 Configure port mirroring
Operation
Enter system view
Enter
view of the destination
port
Define the current port
as the destination port
Exit current view
Enter
view of the source port
Configure the source
port and specify the
direction
packets to be mirrored
Display
settings
mirroring
system-view
Ethernet port
interface
interface-number
monitor-port
quit
Ethernet port interface
interface-number
mirroring-port { inbound |
of the outbound | both }
parameter
of the display mirror
Huawei Technologies Proprietary
Chapter 1 Mirroring Configuration
Command
interface-type
interface-type
1-17
Description
—
—
Required
LACP and TCP must be
disabled on the destination
port.
—
—
Required
Required
This command can
executed in any view.
be