Huawei Quidway S3900 Series Operation Manual page 385

Operation Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
<SwitchA> system-view
[SwitchA] multicast routing-enable
[SwitchA] vlan 20
[SwitchA-vlan20] interface Vlan-interface 20
[SwitchA-Vlan-interface20] ip address 168.10.1.1 255.255.255.0
[SwitchA-Vlan-interface20] pim dm
[SwitchA-Vlan-interface20] quit
# Configure multicast VLAN 10.
[SwitchA] vlan 10
[SwitchA-vlan10] quit
# Configure multicast VLAN 2.
[SwitchA] vlan 2
[SwitchA-vlan2] quit
[SwitchA] interface Ethernet 1/0/5
[SwitchA-Ethernet1/0/5] port hybrid vlan 2
# Configure VLAN 3.
[SwitchA] vlan 3
[SwitchA-vlan3] quit
[SwitchA] interface Ethernet 1/0/6
[SwitchA-Ethernet1/0/6] port hybrid vlan 3
# Define Ethernet 1/0/10 as a hybrid port, add the port to VLAN 2, VLAN 3 and VLAN 10,
and configure the port to include VLAN tags in its outbound packets of VLAN 2, VLAN 3
and VLAN 10.
[SwitchA] interface Ethernet 1/0/10
[SwitchA-Ethernet1/0/10] port link-type hybrid
[SwitchA-Ethernet1/0/10] port hybrid vlan 2 3 10 tagged
[SwitchA-Ethernet1/0/10] quit
# Enable PIM DM and IGMP on VLAN 10.
[SwitchA] multicast routing-enable
[SwitchA] interface Vlan-interface 10
[SwitchA-Vlan-interface10] pim dm
[SwitchA-Vlan-interface10] igmp enable
2) Configure Switch B:
# Enable the IGMP Snooping feature on Switch B.
<SwitchB> system-view
[SwitchB] igmp-snooping enable
# Configure VLAN 10 as a multicast VLAN and enable the IGMP Snooping feature on it.
[SwitchB] vlan 10
[SwitchB-vlan10] service-type multicast
Huawei Technologies Proprietary
2-16
Chapter 2 IGMP Snooping Configuration