Huawei Quidway S3900 Series Operation Manual page 132

Operation Manual - Management VLAN
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Shut down the
management
VLAN interface
Bring
management
VLAN interface
Caution:
To configure the management VLAN of a switch operating as a cluster management
device to be a cluster management VLAN (using the management-vlan vlan-id
command) successfully, make sure the vlan-id argument provided in the
management-vlan vlan-id command is consistent with that of the management
VLAN.
Shutting down or bringing up a management VLAN interface has no effect on the
up/down status of the Ethernet ports in the management VLAN.
1.2.3 Configuration Example
I. Network requirements
The administrator wants to manage the switch QuidwayA remotely through Telnet. The
requirements are as follows: QuidwayA has an IP address, and the route between
QuidwayA and the remote console is reachable.
You need to configure the switch as follows:
Assigning an IP address to the management VLAN interface
Configuring a default route
II. Configuration procedure
# Enter system view.
<QuidwayA> system-view
# Create VLAN 10 and configure VLAN 10 to be the management VLAN.
[QuidwayA] vlan 10
[QuidwayA-vlan10] quit
[QuidwayA] management-vlan 10
# Create the VLAN 10 interface and enter VLAN interface view.
[QuidwayA] interface vlan-interface 10
Command
shutdown
up the
undo shutdown
Huawei Technologies Proprietary
Chapter 1 Management VLAN Configuration
Optional
By default, a management VLAN
interface is down if all the
Ethernet
management VLAN are down; a
management VLAN interface is
up if one or more Ethernet ports in
the management VLAN are up.
1-3
Description
ports in the