Huawei Quidway S3900 Series Operation Manual page 425

Operation Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Configure
BSRs
Configure candidate RPs
Configure static RPs
Limit the range of valid
BSRs
Limit the range of valid
C-RPs
Command
c-bsr
interface-type
candidate
interface-number
hash-mask-len
[ priority ]
c-rp interface-type
interface-number
[ group-policy
acl-number
priority priority ]*
static-rp
rp-address
[ acl-number ]
bsr-policy
acl-number
crp-policy
acl-number
Huawei Technologies Proprietary
7-15
Chapter 7 PIM Configuration
Description
Optional
By default, candidate BSRs are
not set for the switch and the
value of priority is 0.
Optional
You can configure to filter the
IP addresses
multicast groups in ACL.
|
By default, candidate RPs
are not set for the switch and
the value of priority is 0.
Optional
You can configure to filter the
IP addresses
multicast groups in ACL.
By default, static RPs are not
set for the switch.
Optional
You can configure to filter the
IP addresses
multicast groups in ACL.
By default, the range of valid
BSRs is not set for the
switch.
Optional
You can configure to filter the
IP addresses
multicast groups in ACL.
By default, the range of valid
C-RPs is not set for the
switch.
of some
of some
of some
of some