Telnet Configuration With Authentication Mode Being Password - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510
3.3 Telnet Configuration with Authentication Mode Being
Password
3.3.1 Configuration Procedure
Table 3-6 Telnet configuration with the authentication mode being password
Operation
Enter system view
Enter one or more
VTY user interface
views
Configure
authenticate users
logging into VTY
user
using
password
Set the
password
Configure
command
available to users
logging
user interface
Configure
protocol
supported by the
user interface
Make
services available
Set the maximum
number of lines the
screen can contain
Set the
command
size
system-view
user-interface
first-number [ last-number ]
to
authentication-mode
interfaces password
the local
set
local
password
simple } password
the
level
user privilege level level
into the
the
to be protocol inbound { all | ssh
| telnet }
terminal
shell
screen-length
screen-length
history
history-command
buffer
max-size value
Huawei Technologies Proprietary
Chapter 3 Logging in through Telnet
Command
vty
authentication
{ cipher |
3-7
Description
—
—
Required
Required
Optional
By default, commands of level
0 are available to users
logging into VTY
interface.
Optional
By default, both
protocol and SSH protocol are
supported.
Optional
By default, terminal services
are available in all user
interfaces.
Optional
By default, the screen can
contain up to 24 lines.
You can use
screen-length 0 command to
disable the function to display
information in pages.
Optional
The default history command
buffer size is 10. That is, a
history command buffer can
store up to 10 commands by
default.
user
Telnet
the