Enabling Ospf Logging; Configuring Ospf Network Management System (Nms) - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Table 4-19 Configure to fill the MTU field when an interface transmits DD packets
Enter system view
Enter Ethernet interface
view
Enable the interface to fill
in the MTU field when
transmitting DD packets

4.7.8 Enabling OSPF Logging

Table 4-20 Enable OSPF logging
Enter system view
Enter OSPF view
Enable the logging of
neighbor status changes

4.7.9 Configuring OSPF Network Management System (NMS)

Table 4-21 Configure OSPF MIB binding
Enter system view
Configure
binding
Operation
system-view
interface
interface-number
ospf mtu-enable
Operation
system-view
ospf
[ router-id router-id ] ]
log-peer-change
Operation
system-view
OSPF MIB ospf
process-id
Huawei Technologies Proprietary
Command
interface-type
Command
[ process-id
Command
mib-binding
4-25
Chapter 4 OSPF Configuration
Description
—
Required
Optional
By default, the MTU value
is 0 when an interface
transmits DD packets.
That is, the actual MTU
value of the interface is
not filled in.
Description
—
—
Optional
Log neighbor
changes.
Description
—
Optional
By default, MIB is bound
to the first enabled OSPF
process. When multiple
OSPF processes
enabled, you
configure to which OSPF
process the MIB is bound.
status
are
can