Enabling The Poe Feature On A Port; Setting The Maximum Output Power On A Port - Huawei Quidway S3900 Series Operation Manual

Operation Manual – PoE & PoE Profile
Quidway S3900 Series Ethernet Switches-Release 1510
Set PoE management mode and
PoE priority of a port
Set the PoE mode on a port
Configure the PD compatibility
detection feature
Configure PoE over-temperature
protection on the switch
Upgrade
software online

1.3 Enabling the PoE Feature on a Port

Table 1-2 Enable the PoE feature on a port
Enter system view
Enter Ethernet port view
Enable the PoE feature on
the port

1.4 Setting the Maximum Output Power on a Port

The maximum power that can be supplied by a PoE-enabled S3900 switch to its
PD is 15400 mW. In practice, you can set the maximum power on a port
depending on the actual power of the PD, in the range of 1000 to 15400 mW and in
the granularity of 100 mW.
Table 1-3 Set the maximum output power on a port
Enter system view
Enter Ethernet port view
Operation
the PSE processing
Operation
system-view
interface
interface-number
poe enable
Operation
system-view
interface
interface-number
Chapter 1 PoE Configuration
Description
Section 1.5 Setting PoE
Optional Management Mode and
PoE Priority of a Port
Section 1.6
Optional
PoE Mode on a Port
Section 1.7
Optional the
Detection Feature
Section 1.8
Optional PoE
Protection on the Switch
Section 1.9
Optional the
Software Online
Command
interface-type
Command
interface-type
1-3
Related section
Setting the
Configuring
PD Compatibility
Configuring
Over-Temperature
Upgrading
PSE Processing
Description
—
—
Required
By default, the PoE
feature is disabled
on a port
Description
—
—