Enabling Information Output To The Snmp - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Information Center
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Set the format of
time stamp
Note:
To view debugging information of specific modules, you need to set the information
type as debug in the info-center source command, and enable debugging on
corresponding modules with the debugging command as well.

1.2.7 Enabling Information Output to the SNMP

Table 1-12 lists the related configurations on the switch.
Table 1-12 Enable information output to the SNMP
Operation
Enter system view
Enable
information center
Enable information
output
SNMP
Define
information source
Set the format of
time stamp
info-center timestamp { log | trap
| debugging } { boot | date |
none }
Command
system-view
the
info-center enable
info-center snmp channel
to the { channel-number
channel-name }
info-center
{ modu-name | default }
an channel { channel-number |
channel-name } [ { log | trap
| debug } { level severity |
state state } ]*
info-center
{ log | trap | debugging }
{ boot | date | none }
Huawei Technologies Proprietary
Command
—
Optional
By default, the information
center is enabled.
Required
By default, the switch outputs
|
trap information to SNMP
through channel 5.
source
Required
Optional
This is to set the time stamp
timestamp
format for log/debugging/trap
information output.
This determines how the time
stamp is presented to users.
1-13
Chapter 1 Information Center
Description
Optional
This is to set the time
stamp format
log/debugging/trap
information output.
This determines how
the time stamp
presented to users.
Description
for
is