Configure Suppression On The Multicast Source Port; Clear The Related Multicast Entries - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510

3.2.2 Configure Suppression on the Multicast Source Port

I. Configure suppression on the multicast source port in system view
Table 3-3 Configure suppression on the multicast source port in system view
Operation
Enter system view
Configure suppression
on the multicast source
port
II. Configure suppression on the multicast source port in Ethernet port view
Table 3-4 Configure suppression on the multicast source port in Ethernet port view
Operation
Enter system view
Enter Ethernet port view
Configure suppression on
the multicast source port
in Ethernet port view

3.2.3 Clear the Related Multicast Entries

Use the reset command in user view to clear the related statistics information about the
common multicast configuration.
Table 3-5 Clear the related multicast entries
Operation
Clear
multicast
forwarding
(MFC) forwarding
entries
statistics
information about
the forwarding
entries
Command
system-view
multicast-source-de
ny [
interface-list ]
system-view
interface
interface-number
multicast-source-deny
the
reset multicast
case [ statistics ] { all | { group-address [ mask
{ group-mask | group-mask-length } ] |
or source-address [ mask { source-mask |
source-mask-length
incoming-interface
interface-number } * }
Huawei Technologies Proprietary
3-3
Chapter 3 Common Multicast Configuration
—
Required
The
interface
multicast source port feature is
disabled by default.
Command
—
interface-type
—
Optional
The suppression on the
multicast
feature is disabled on all
ports of the switch by
default.
Command
forwarding-table
} ]
interface-type
Description
suppression on the
Description
source port
Description
Clear the related
MFC forwarding
| entries