Customizing Dhcp Service; Configuring Gateway Addresses For Dhcp Clients - Huawei Quidway S3900 Series Operation Manual

Operation Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Configure
clients to be of a
specific
node type

2.2.7 Customizing DHCP Service

With the evolution of DHCP, new options are constantly coming into being. You can
add the new options as the properties of DHCP servers by performing the following
configuration.
Table 2-8 Customize DHCP service
Operation
Enter system view
Create a DHCP
address pool and
enter
address pool view
Configure
customized
options

2.2.8 Configuring Gateway Addresses for DHCP Clients

Gateways are necessary for DHCP clients to access servers/hosts outside the current
network segment. After you configure gateway addresses on a DHCP server, the
DHPC server provides the gateway addresses to DHCP clients as well while assigning
IP addresses to them.
You can configure gateway addresses for address pools on a DHCP server. Currently,
you can configure up to eight gateway addresses for a DHCP address pool.
Command
DHCP
netbios-type { b-node |
NetBIOS
h-node | m-node | p-node }
Command
system-view
dhcp server
DHCP pool-name
option
ascii-string
hex-string&<1-10>
ip-address
ip-address&<1-8> }
Huawei Technologies Proprietary
Chapter 2 DHCP Server Configuration
Optional
By default, no NetBIOS node
type of the DHCP client is
specified and a DHCP client
uses an h-node
—
Required
ip-pool
By default, no global DHCP
address pool is created
code { ascii
Required
| hex
|
By default, no customized
option is configured
2-12
Description
Description