Huawei Quidway S3900 Series Operation Manual page 744

Operation Manual – Cluster
Quidway S3900 Series Ethernet Switches-Release 1510
1.2.2 Enabling NDP Globally and for Specific Ports
Table 1-3 Enable NDP globally and for a specific port
Operation
Enter system view
Enable NDP globally
Enable
NDP for
the
specified
Ethernet
ports
1.2.3 Configuring NDP-related Parameters
Table 1-4 Configure NDP-related parameters
Operation
Enter system view
Configure
holdtime of NDP
information
Configure
interval
NDP packets
1.2.4 Enabling NTDP Globally and for Specific Ports
Table 1-5 Enable NTDP globally and for specific ports
Operation
Enter system view
system-view
ndp enable
In system
ndp enable interface
view port-list
Enter
Ether
interface interface-type
net
interface-number
port
In
view
Ether
net
Enabl
port
e
view
NDP
ndp enable
on
the
port
Command
system-view
the
ndp
aging-in-seconds
the
to send
ndp timer hello seconds
Command
system-view
Huawei Technologies Proprietary
Command
—
Optional
timer aging
By default, the aging time of
NDP packets is 180 seconds
Optional
By default, the interval of
sending NDP packets is 60
seconds
—
1-8
Chapter 1 Cluster
Description
—
Required
By default, NDP is enabled
globally
You must choose one of
them
By default, NDP is enabled
on the port
Description
Description