Configuring Access Port Attribute; Configuring Hybrid Port Attribute - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Port Basic Configuration
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Enter Ethernet port view
Enable flow control on
the Ethernet port

1.2.4 Configuring Access Port Attribute

Table 1-6 Configure access port attribute
Enter system view
Enter Ethernet port view
Set the link type of the port
to access
Add the current access port
to a specified VLAN

1.2.5 Configuring Hybrid Port Attribute

Table 1-7 Configure hybrid port attribute
Operation
Enter system view
Enter Ethernet port
view
Set the link type of the
port to hybrid
Set the default VLAN
ID for the hybrid port
interface
interface-type
interface-number
flow-control
Operation
system-view
interface
interface-number
port link-type access
port access vlan vlan-id
system-view
interface
interface-number
port link-type hybrid
port hybrid pvid vlan
vlan-id
Huawei Technologies Proprietary
Chapter 1 Port Basic Configuration
Command
—
By default, flow control is not
enabled on the port.
Command
interface-type
Command
—
interface-type
—
Required
Optional
If no default VLAN ID is set
for a hybrid port, VLAN 1
(system default VLAN) is
used as the default VLAN of
the port.
1-6
Remarks
Remarks
—
—
Optional
By default, the link type
of a port is access.
Optional
Remarks