Huawei Quidway S3900 Series Operation Manual page 502

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Add a local user and enter
local user view
Set a password for the
specified user
Set the password display
mode of all local users
Set the
specified user
Authorize
access
type(s) of service(s)
Set the priority level of the
user
Set the attributes of the
user whose service type is
lan-access
Operation
local-user user-name
password { simple |
cipher } password
local-user
password-display-m
ode { cipher-force |
auto }
state of the
state { active | block }
the user to
lan-access | { telnet |
the specified
ssh
[ level level ] }
level level
attribute
ip-address
mac-address | idle-cut
second | access-limit
max-user-number
vlan vlan-id | location
{
port
port port-number } }*
Huawei Technologies Proprietary
Chapter 1 AAA & RADIUS & HWTACACS
Command
service-type { ftp |
| terminal }*
{ ip
| mac
nas-ip ip-address
port-number
1-21
Description
Required
By default, there is no local
user in the system.
Optional
Optional
By default, the password
display mode of all access
users is auto, indicating the
passwords of access users
are displayed in the modes
set with the password
command.
Optional
By default, the local users
are in the active state once
they are created, that is,
they are allowed to request
network services.
Required
By default, the system does
not authorize the user to
access any service.
Optional
By default, the priority level
of the user is 0.
Optional
If the user is bound to a
remote port, you
specify the
parameter (the
|
ip-address is 127.0.0.1 by
default, representing
device). If the user is bound
|
to a local port, you do not
need to specify the nas-ip
parameter.
Configuration
must
nas-ip
following
this