Displaying Hwping Configuration; Configuration Example - Huawei Quidway S3900 Series Operation Manual

Operation Manual - HWPing
Quidway S3900 Series Ethernet Switches-Release 1510
Execute the test

1.2.3 Displaying HWPing Configuration

After the above HWPing configurations, you can execute the display command in any
view to display the information of operation status through which you can verify the
configuration effect.
Table 1-2 Display HWPing configuration
Display the information of
HWPing test history
Display the latest HWPing
test results

1.2.4 Configuration Example

I. Network Requirement
Perform an HWPing ICMP test between two switches. Like a ping test, this test uses
ICMP to test the RTTs of data packets between the source and the destination.
II. Configuration procedure
# Enable HWPing Client.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] hwping-agent enable
# Create an HWPing test group "administrator icmp".
[Quidway] hwping administrator icmp
# Specify the test type as ICMP.
[Quidway-hwping-administrator-icmp] test-type icmp
# Specify the destination IP address as 1.1.1.99.
[Quidway-hwping-administrator-icmp] destination-ip 1.1.1.99
Operation
Configure
timeout time of the
test.
Operation
display hwping history
[
operation-tag ]
display hwping results
[
operation-tag ]
Huawei Technologies Proprietary
Chapter 1 HWPing Configurations
Command
the
timeout time
test-enable
Command
administrator-name
administrator-name
1-3
Description
Optional
By default, the timeout
time is 3 seconds.
Required
Description
The display command
can be executed in any
view.