Console Port Login Configurations For Different Authentication Modes - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510
Table 2-2 Common configuration of Console port login
Console port
configuration
AUX
interface
configuration
Terminal
configuration
Caution:
Changing of Console port configuration terminates the connection to the Console port.
To establish the connection again, you need to modify the configuration of the
termination emulation utility running on your PC accordingly. Refer to section 2.2
"Logging in through the Console Port" for more.

2.3.2 Console Port Login Configurations for Different Authentication Modes

Table 2-3 lists Console port login configurations for different authentication modes.
Configuration
Baud rate
Check mode
Stop bits
Data bits
Configure
user command
available to the users
logging into the AUX
user interface
Make terminal
services available
Set the maximum
number of lines the
screen can contain
Set history command
buffer size
Set the timeout time
of a user interface
Huawei Technologies Proprietary
Chapter 2 Logging in through the Console Port
Optional
The default baud rate is 9,600 bps.
Optional
By default, the check mode of the Console
port is set to "none", which means no check
bit.
Optional
The default stop bits of a Console port is 1.
Optional
The default data bits of a Console port is 8.
the
Optional
level
By default, commands of level 3 are
available to the users logging into the AUX
user interface.
Optional
By default, terminal services are available in
all user interfaces
Optional
By default, the screen can contain up to 24
lines.
Optional
By default, the history command buffer can
contain up to 10 commands.
Optional
The default timeout time is 10 minutes.
2-4
Remarks