Controlling Network Management Users By Source Ip Addresses - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510
<Quidway> system-view
[Quidway] acl number 2000 match-order config
[Quidway-acl-basic-2000] rule 1 permit source 10.110.100.52 0
[Quidway-acl-basic-2000] rule 2 permit source 10.110.100.46 0
[Quidway-acl-basic-2000] rule 3 deny source any
[Quidway-acl-basic-2000] quit
# Apply the ACL.
[Quidway] user-interface vty 0 4
[Quidway-ui-vty0-4] acl 2000 inbound
8.3 Controlling Network Management Users by Source IP
Addresses
You can manage a Quidway series Ethernet switch through network management
software. Network management users can access switches through SNMP.
You need to perform the following two operations to control network management users
by source IP addresses.
Defining an ACL
Applying the ACL to control users accessing the switch through SNMP
8.3.1 Prerequisites
The controlling policy against network management users is determined, including the
source IP addresses to be controlled and the controlling actions (permitting or denying).

8.3.2 Controlling Network Management Users by Source IP Addresses

Controlling network management users by source IP addresses is achieved by
applying basic ACLs, which are numbered from 2000 to 2999.
Table 8-5 Control network management users by source IP addresses
Operation
Enter system view
Create a basic ACL
or enter basic ACL
view
Define rules for the
ACL
Command
system-view
acl number acl-number
[ match-order { config |
auto } ]
rule [ rule-id ] { permit |
deny } [ source { sour-addr
sour-wildcard | any } ]
[ time-range time-name ]
[ fragment ]
Huawei Technologies Proprietary
8-5
Chapter 8 User Control
Description
—
As for the acl number
command, the
keyword is specified
default.
Required
config
by