Displaying Protocol-Based Vlan Configuration - Huawei Quidway S3900 Series Operation Manual

Operation Manual -- VLAN
Quidway S3900 Series Ethernet Switches-Release 1510
II. Configuration procedure
Table 2-6 Associate a port with the protocol-based VLAN
Operation
Enter system view
Enter port view
Associate a port
with
protocol-based
VLAN
Caution:
For the operation of adding a port to the VLAN in the untag way, refer to the section
"Port Basic Configuration" in this manual.

2.3.3 Displaying Protocol-Based VLAN Configuration

After the configuration above, you can execute the display command in any view to
display the running status, so as to verify the configuration.
Table 2-7 Display VLAN configuration
Operation
Display
information
the protocol-based
VLAN
Display
protocol
information
protocol
configured on the
specified VLAN
Display
protocol
information
protocol
configured on the
specified port
Command
system-view
interface
interface-number
port hybrid protocol-vlan
the
vlan vlan-id { protocol-index
[ to protocol-end ] | all }
Command
the
display vlan [ vlan-id [ to
about
vlan-id ] | all | static |
dynamic ]
the
and display protocol-vlan vlan
indexes { vlan-id [ to vlan-id ] | all }
the
display
interface
and
interface-number
indexes
interface-type
interface-number ] | all }
Huawei Technologies Proprietary
—
interface-type
Required
Required
You cam execute the display
command in any view
protocol-vlan
{ interface-type
[ to
2-6
Chapter 2 VLAN Configuration
Description
Description