Huawei Quidway S3900 Series Operation Manual page 873

Operation Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510
Switch Switch
Figure 1-4 Network diagram for TFTP configuration
Table 1-9 describes the operations needed when a switch operates as a TFTP client.
Table 1-9 Configurations needed when a switch operates as a TFTP client
Device
Switch
TFTP
server
1.2.2 TFTP Configuration
I. Prerequisites
A switch operates as a TFTP client and a remote PC as the TFTP server. The network
operates properly, as shown in Figure 1-4.
II. Basic TFTP configurations
Table 1-10 Basic TFTP configurations
Operation
Download
through TFTP
Upload
through TFTP
Enter system view
Network Network
Network Network
Configuration
Configure an IP address
for the VLAN interface of
the switch so that it is
reachable for TFTP server.
You can log into a TFTP
server directly for
accessing through TFTP
commands.
The TFTP server is started
and the TFTP
directory is configured.
Command
a file tftp tftp-server
source-file [ dest-file ]
a file
tftp tftp-server
source-file [ dest-file ]
system-view
Huawei Technologies Proprietary
Chapter 1 FTP and TFTP Configuration
PC PC
Default
TFTP applies to networks where
client-server
— comparatively simple. It requires
the routes between TFTP clients
TFTP servers are reachable.
file
— —
work — —
get
Optional
put
Optional
—
1-15
Description
interactions are
Description