Huawei Quidway S3900 Series Operation Manual page 101

Operation Manual – Configuration File Management
Quidway S3900 Series Ethernet Switches-Release 1510
Table 1-1 Configure a configuration file
Operation
Save the current
configuration to a
specified
configuration
and specify
configuration file to
be
primary/secondary
configuration file
Remove a specific
configuration
from the Flash
Specify the name
and attribute of the
configuration file to
be used in the next
startup
Specify
switch
without loading the
configuration file
Display the primary
configuration file
Display the current
configuration
Display
configuration
performed in the
current view
Display
information about
the configuration
file to be used for
startup.
Command
file
save [ cfgfile | [safely ]
the
[ backup | main ] ]
the
reset saved-configuration
file
[ backup | main ]
startup
saved-configuration cfgfile
[ backup | main ]
that the
undo
starts
saved-configuration [ unit
unit-id ]
display
saved-configuration [ unit
unit-id ] [ by-linenum ]
display
current-configuration
[
[ configuration-type
interface [ interface-type ]
[ interface-number ] | vlan
[ vlan-id ] ] [ by-linenum [ |
{ begin | include | exclude }
regular-expression ]
the
display this [ by-linenum ]
the
display
unit-id ]
Huawei Technologies Proprietary
Chapter 1 Configuration File Management
Optional
The save command can be
executed in any view.
Optional
Optional
By default, the switch uses
the main configuration file in
the next startup.
startup
Optional
configuration
] |
Optional
These commands can be
executed in any view.
startup [ unit
1-2
Description