Configuring File Attributes - Huawei Quidway S3900 Series Operation Manual

Operation Manual – File System Management
Quidway S3900 Series Ethernet Switches-Release 1510
File operations and file attribute operations are independent of each other. For example,
if you delete a file with the main attribute from the Flash memory, the main attribute is
not deleted. It becomes the attribute of a valid file that is later downloaded to the Flash
memory and has the same name as the previously deleted one.
After the BootROM of a switch is upgraded, the previous default app startup file will
have the main attribute.

1.1.2 Configuring File Attributes

You can configure and view the main attribute and backup attribute of the files used for
the next startup of a switch, and switch the main and backup attribute of the files.
Perform the configuration listed in Table 1-2 in user view. The display commands can
be executed in any view.
Table 1-2 Configure file attributes
Configure the app file with
the main attribute for the
next startup
Configure the app file with
the backup attribute for the
next startup
Configure the Web file and
its attribute
Switch the file attributes
between main and backup
Specify to enable user to
use
password
BOOT menu
Display
about the app file used as
the startup file
Display
about
configuration file
Operation
the customized
to enter the
the information
the information
the startup
Huawei Technologies Proprietary
Chapter 1 File System Management and
Command
boot boot-loader file-url
[ fabric ]
boot boot-loader
backup-attribute file-url
[ fabric ]
boot web-package
webfile { backup | main }
boot attribute-switch
{ all | app | configuration
| web } fabric
startup bootrom-access
enable
display boot-loader
[ unit unit-id ]
display startup [ unit
unit-id ]
1-2
Configuration
Description
Optional
Optional
Optional
Optional
Optional
By default, the user is
enabled to use the
customized password to
enter the BOOT menu.
Optional
These commands can
be executed in any view.