Huawei Quidway S3900 Series Operation Manual page 868

Operation Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Upload a local file to the
remote FTP server
Rename a file on a remote
host.
Switch to another FTP
user
Connect to a remote FTP
server
Terminate the current FTP
connection without exiting
FTP client view
Terminate the current FTP
connection without exiting
FTP client view
Terminate the current FTP
connection and quit to
user view
Terminate the current FTP
control connection and
data connection
Display the on-line help on
a specified
concerning FTP
Enable verbose function
II. Specifying the source interface and source IP address for an FTP client
You can specify the source interface and source IP address for a switch acting as an
FTP client, so that it connects with a remote FTP server through the IP address of the
specified interface or the specified IP address.
Table 1-8 Specify the source interface and source IP address for an FTP client
Operation
Specify
interface so that the FTP
client uses it to connect
with an FTP server for the
next time
put localfile [ remotefile ]
rename
remote-dest
user
[ password ]
open
server-name } [ port ]
disconnect
close
quit
bye
remotehelp
command
[ protocol-command ]
verbose
the source
ftp { cluster | remote-server }
source-interface
interface-type
interface-number
Huawei Technologies Proprietary
1-10
Chapter 1 FTP and TFTP Configuration
Command
Optional
remote-source
Optional
username
Optional
{ ip-address |
Optional
Optional
Optional
Optional
Optional
Optional
Optional
The verbose function is
enabled by default.
Command
Description
Description
Optional