Configuring A Mac Address Entry - Huawei Quidway S3900 Series Operation Manual

Operation Manual – MAC Address Table
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1
Configuring the maximum number of MAC addresses a port can learn

1.2.1 Configuring a MAC Address Entry

You can add, modify, or remove one MAC address entry, remove all MAC address
entries (unicast MAC addresses only) concerning a specific port, or remove specific
type of MAC address entries (dynamic or static MAC address entries).
You can add a MAC address entry in either system view or Ethernet port view.
I. Adding a MAC address entry in system view
Table 1-2 Add a MAC address entry in system view
Enter system view
Add a MAC address
entry
Caution:
When you add a MAC address entry, the port specified by the interface argument must
belong to the VLAN specified by the vlan argument in the command. Otherwise, the
entry will not be added.
II. Adding a MAC address entry in Ethernet port view
Table 1-3 Add a MAC address entry in Ethernet port view
Operation
Enter system view
Enter Ethernet port
view
Add a MAC address
entry
Operation
system-view
interface
interface-number
mac-address { static | dynamic
| blackhole } mac-address vlan
vlan-id
Huawei Technologies Proprietary
Command
system-view
mac-address { static |
dynamic | blackhole }
mac-address interface
interface-type
interface-number vlan
vlan-id
Command
interface-type
1-4
MAC Address Table Management
Description
—
Required
Description
—
—
Required