Applying The Qos Profile To The Port Manually - Huawei Quidway S3900 Series Operation Manual

Operation Manual - QoS&QoS Profile
Quidway S3900 Series Ethernet Switches-Release 1510
[Quidway-radius-radius1] quit
# Create the user domain test163.net and specify radius1 as your RADIUS server
group.
[Quidway] domain test163.net
[Quidway-isp-test163.net] radius-scheme radius1
[Quidway-isp-test163.net] quit
# Define the ACL rules
[Quidway] acl number 3000
[Quidway-acl-adv-3000] rule 1 permit ip destination any
[Quidway-acl-adv-3000] quit
# Define the QoS profile function
[Quidway] qos-profile example
[Quidway-qos-profile-example] traffic-limit inbound ip-group 3000 128 exceed
drop
[Quidway-qos-profile-example] traffic-priority inbound ip-group 3000 dscp 46

2.4 Applying the QoS Profile to the Port Manually

After this configuration, all the traffic actions in the QoS profile will be applied to the
current port.
I. Applying the QoS profile to the port in system view
You can apply the profile configurations to one port or more continuous ports manually
in system view.
Table 2-3 Apply the QoS profile to the port manually in system view
Operation
Enter system view
Apply
profile to the port
manually
II. Applying the QoS profile to the current port in Ethernet port view
Table 2-4 Apply the QoS profile to the port manually
Enter system view
Enter Ethernet port view
system-view
the QoS
apply
interface interface-list
Operation
system-view
interface
interface-number
Huawei Technologies Proprietary
Chapter 2 QoS Profile Configuration
Command
qos-profile profile-name
Command
interface-type
2-5
Description
—
Required
Description
—
—