Configuring The Port Tracking Function - Huawei Quidway S3900 Series Operation Manual

Operation Manual – VRRP
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Specify
interface
tracked

1.2.4 Configuring the Port Tracking Function

Table 1-5 Configure the VRRP backup group port tracking function
Operation
Enter system view
Create a VLAN
Add an Ethernet
port to the VLAN
Quit to system view
Enter Ethernet port
view
Enable
tracking function
Note:
The port to be tracked can be in the VLAN which the VLAN interface of the backup
group belongs to.
Up to eight ports can be monitored simultaneously.
1.2.5 Configuring the Auto Detect Function for VRRP
Note:
You need to create the detecting group and perform VRRP-related configurations
before the following operations. Refer to Auto Detect Operation Manual for the creation
of a detecting group.
Command
the
vrrp vrid
to be track vlan-interface vlan-id
[ reduced value-reduced ]
Command
system-view
vlan vlan-id
port
interface-number
quit
interface
interface-number
vrrp vlan-interface vlan-id
the port
vrid virtual-router-id track
[ reduced value-reduced ]
Huawei Technologies Proprietary
Optional
virtual-router-id
value-reduced:
which the priority is to be
reduced.
value is 10.
—
Required
interface-type
—
Quit the VLAN view to system
view
interface-type
—
Required
By default, the value by which
the priority of an Ethernet port
is decreased is 10.
1-9
Chapter 1 VRRP Configuration
Description
Value
By default,
Description
by
this