Displaying And Maintaining Link Aggregation Configuration - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Link Aggregation
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Enter
port view
Enable LACP on
the port
Configure the port
priority
1.3 Displaying and Maintaining Link Aggregation
Configuration
After the above configuration, execute the display command in any view to display the
running status after the link aggregation configuration and verify your configuration.
Execute the reset command in user view to clear LACP statistics on ports.
Table 1-4 Display and maintain link aggregation configuration
Display
information
aggregation groups
Display
information of a specific
aggregation group or all
aggregation groups
Display link aggregation
details of a specified port or
port range
Display local device ID
Clear LACP statistics about
a specified port or port
range
Command
interface
Ethernet
interface-type
interface-number
lacp enable
lacp port-priority
port-priority
Operation
summary
of all
detailed
Huawei Technologies Proprietary
Chapter 1 Link Aggregation Configuration
—
Required
By default, LACP is disabled on a port.
Optional
By default, the port priority is 32,768.
Command
display link-aggregation
summary
display link-aggregation
verbose [ agg-id ]
display link-aggregation
interface interface-type
interface-number
interface-type
interface-number ]
display lacp system-id
reset lacp
[ interface interface-type
interface-number
interface-type
interface-number ] ]
1-11
Description
Description
You can execute
the
command in any
view.
[ to
statistics
Execute the reset
[ to command in user
view.
display