Huawei Quidway S3900 Series Operation Manual page 769

Operation Manual – PoE & PoE Profile
Quidway S3900 Series Ethernet Switches-Release 1510
Configure
the
relevant
features in
PoE
profile
Quit system view
Apply the
existing
PoE
profile
the
specified
Ethernet
port
Note:
A PoE profile is a group of PoE configurations. Multiple PoE features can be set in a
PoE profile. When the poe apply command is used to apply a PoE profile to a port,
some PoE features can be applied successfully while some PoE configurations in it can
not. PoE profiles are applied to S3900 series Ethernet switches according to the
following rules:
Operation
Enable the PoE
feature on a port
Configure PoE
mode for Ethernet
ports
Configure the PoE
priority for Ethernet
ports
Configure the
maximum power
for Ethernet ports
In system view
Enter
to Ethernet
port
view
In
Ethernet
Apply
port
the
view
existing
PoE
profile to
the port
Huawei Technologies Proprietary
Chapter 2 PoE Profile Configuration
Command
poe enable
poe mode { signal | spare }
poe priority { critical | high
| low }
poe max-power max-power
quit
apply poe-profile
profilename interface
interface-type
interface-number
interface-type
interface-number ]
interface interface-type
interface-number
apply poe-profile
profile-name
2-2
Description
Required
The PoE feature
on a port
disabled
default
Optional
By default, PoE
mode is set to be
signal
Optional
By default, PoE
priority is set to
low
Optional
By default,
maximum power
is set to
15,400 mW
—
[ to
Required
Users
decide whether
to configure the
settings
system view or
port view
is
by
be
can
in