Huawei Quidway S3900 Series Operation Manual page 887

Operation Manual – Information Center
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Define
information source
Set the format of
time stamp
To view debugging/log/trap output information on the console, you should also enable
the corresponding debugging/log/trap information terminal display on the switch.
For example, to view log information of the switch on the console, you should not only
enable log information output to the console, but also enable log information terminal
display with the terminal logging command.
Perform the following operations in user view.
Table 1-7 Enable debugging/log/trap terminal display
Operation
Enable
debugging/log/trap
information
terminal
function
Enable debugging
information
terminal
function
Enable
information
terminal
function
Enable
information
terminal
function
Command
info-center
{ modu-name | default }
an channel { channel-number |
channel-name } [ { log | trap
| debug } { level severity |
state state } ]*
info-center
{ log | trap | debugging }
{ boot | date | none }
Command
the
terminal monitor
display
terminal debugging
display
log
terminal logging
display
trap
terminal trapping
display
Huawei Technologies Proprietary
1-9
Chapter 1 Information Center
source
Required
timestamp
Optional
Optional
By default, this function is
enabled for console user.
Optional
By default, the debugging
information terminal display is
disabled for terminal users.
Optional
By default, log information
terminal display is enabled for
console users.
Optional
By default, trap information
terminal display is enabled for
terminal users.
Description
Description