Pim Configuration Examples; Pim-Dm Configuration Example - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Table 7-12 Display and maintain PIM
Configuration
Display
routing tables
Display the information
about PIM interfaces
Display the information
about
routers
Display BSR information
Display RP information

7.6 PIM Configuration Examples

7.6.1 PIM-DM Configuration Example

I. Network requirements
Lanswitch1 is connected to Multicast Source through Vlan-interface 10, to Lanswitch2
through Vlan-interface 11 and to Lanswitch3 through Vlan-interface 12. Through
PIM-DM, multicast is implemented among Receiver 1, Receiver 2 and Multicast
Source.
display
routing-table [ { { *g
[ group-address [ mask
{ mask-length | mask } ] ] |
**rp [ rp-address [ mask
{ mask-length | mask } ] ] }
| { group-address [ mask
PIM multicast
{ mask-length | mask } ] |
source-address [ mask
{ mask-length | mask } ] }
* } | incoming-interface
{
interface-number | null } |
{
sparse-mode } ] *
display pim interface
[
interface-number ]
display pim neighbor
PIM neighbor [ interface interface-type
interface-number ]
display pim bsr-info
display
[ group-address ]
Huawei Technologies Proprietary
Command
pim
interface-type
dense-mode |
interface-type
pim rp-info
7-19
Chapter 7 PIM Configuration
Description
You can execute
display command in any
view.
the