Configuring Description Information For Msdp Peers; Configuring Anycast Rp Application - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Configure
connection control

8.3.2 Configuring Description Information for MSDP Peers

You can configure description information for each MSDP peer to manage and
memorize the MSDP peers.
Table 8-3 Configure description information for an MSDP peer
Operation
Enter system view
Enter MSDP view
Configure
information for an MSDP
peer

8.3.3 Configuring Anycast RP Application

If you configure the same interface (usually Loopback interface) addresses on two RPs
in the same PIM-SM domain, the two RPs will be MSDP peers to each other. To prevent
failure of RPF check on SA messages between MSDP peers, you must configure the
RP address to be carried in the SA messages.
Table 8-4 Configure Anycast RP application
Operation
Enter system view
Enter MSDP view
Create an MSDP peer
connection
Operation
MSDP peer
system-view
msdp
description
peer
description text
system-view
msdp
peer
connect-interface
interface-type
interface-number
Huawei Technologies Proprietary
Description
Section 8.3.5
Optional MSDP
Control
Command
peer-address
Command
peer-address
8-9
Chapter 8 MSDP Configuration
Related section
Configuring
Peer Connection
Description
—
—
Optional
The peer-address
argument is the address
of the peer. You can
configure addresses of
multiple peers for multiple
times.
By default, an MSDP peer
has no description text.
Description
—
—
Required