Huawei Quidway S3900 Series Operation Manual page 83

Operation Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510
（1） （1）
(1) RS-232 port
Figure 5-1 Connect to the Console port
Launch a terminal emulation utility (such as Terminal in Windows 3.X or
HyperTerminal in Windows 9X) on the PC, with the baud rate set to 9,600 bps,
data bits set to 8, parity check set to none, and flow control set to none.
Turn on the switch and press Enter as prompted. The prompt (such as <Quidway>)
appears, as shown in Figure 5-2.
Figure 5-2 The terminal window
Perform the following operations in the terminal window to assign an IP address to
the management VLAN interface of the switch.
# Enter system view.
<Quidway> system-view
# Enter management VLAN interface view.
[Quidway] interface Vlan-interface 1
# Remove the existing IP address of the management VLAN interface.
[Quidway-Vlan-interface1] undo ip address
# Configure the IP address of the management VLAN interface to be 10.153.17.82, with
the subnet mask set to 255.255.255.0.
（3） （3）
(2) Console port
Huawei Technologies Proprietary
Chapter 5 Logging in through Web-based
（2） （2）
5-2
Network Management System
(3) Configuration cable