NEC Univerge SV8100 Features And Specifications Manual page 45

UNIVERGE SV8100
3. Dial your Account Code (1~16 digits, using 0~9 and
If you make an incorrect entry, your system may automatically alert the operator. If Account Codes are hidden,
each digit you dial shows
4. Dial .
- OR -
Press your Account Code key (Program 15-07 or SC 751: code 50).
5. Dial the number you want to call.
To enter an Account Code for an incoming call:
This procedure is not available for single line telephones.
1. Answer incoming call.
If Account Codes for Incoming Calls is disabled, the following steps dial digits out to the connected trunk.
2. Dial .
3. Enter the Account Code.
You can enter any code of the proper length. Incoming Account Codes cannot be Forced or Verified.
4. Dial .
To enter an Account Code at a single line telephone:
1. Access trunk for outside call.
You can access a trunk by dialing a code. Refer to Central Office Calls, Placing for more information.
2. Dial .
3. Enter Account Code (1~16 digits).
4. Dial .
5. Dial number you want to call.
SV8100 Features and Specifications Manual
on the telephone display.
).
#
Issue 1.0
2 - 21