NEC Univerge SV8100 Features And Specifications Manual page 43

UNIVERGE SV8100
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
14-01-11 Basic Trunk Data Setup – Account
Code Required
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
21-01-04 System Options for Outgoing
Calls – Dial Tone Detection Time
35-05-01 Account Code Setup – Account
Code Mode
35-05-02 Account Code Setup – Forced
Account Code Toll Call Setup
35-05-03 Account Code Setup – Account
Codes for Incoming Calls
35-05-04 Account Code Setup – Hiding
Account Codes
SV8100 Features and Specifications Manual
Description/Comments
Enable (1) or Disable (0) Account
Codes for each trunk.
Assign a function key as an Account
Code key (code 50). Use this key
instead of the dial pad to enter the
before and after the Account Code.
Assign a Class of Service (1~15) to
an extension.
Adjust the interval the system waits
for the Telco to return Dial Tone.
Use this option to select the
Account Code Mode.
Enable Account Codes for all calls
or just toll calls (for mode 2 or 3 in
Program 35-05-01).
For each Class of Service (1~15),
enter 1 in this option to Enable
Account Codes for incoming calls.
Enter 0 to Disable Account Codes
for incoming calls. If disabled, any
codes you enter dial out on the
connected trunk.
For each Class of Service (1~15),
enter 1 to have the system hide
Account Codes on an extension
display as they are entered. Enter 0
to have the Account Codes
displayed.
Assigned Data
0= Disable
1= Enable
(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0~64800 (seconds)
(default = 5 seconds)
0 = Account Codes
disabled (None)
1 = Account Codes
optional
2 = Account Codes
required but not verified
(No verify)
3 = Account Codes
required and verified
(Verify)
(default = 0)
0 = Account Codes for
toll and local calls (All)
1 = Account Codes just
for toll calls (STD)
(default = 0)
0 = Account Codes for
incoming calls disabled
(No)
1 = Account codes for
incoming calls (Yes)
(default = 0)
0 = Display Account
Codes
1 = Hide Account Codes
(default = 0)
Issue 1.0
Level
1 2 3
2 - 19