Figure 8-1 Nec Sip Conference Installation; Figure 8-2 Install Additional Nec Sip Conference Units - NEC Univerge SV9100 System Hardware Manual

Figure 8-1 NEC SIP Conference Installation

Figure 8-2 Install Additional NEC SIP Conference Units

8-2
2. Connect the base unit to the Ethernet jack using the Ethernet cable.
3. Connect the power cord to the base unit and plug it directly into an electrical
outlet.
4. To connect additional units, connect the 12 foot Connection cable to the Link
Out jack on the first phone and to the Link In jack on the second phone.
Up to three additional SIP Conference Max phones for a total of
four may be connected.
NOTE
Installing SV9100 Conference Solutions
Issue 3.0