Table of Contents
Advertisement
Ventilation Concept
15.1.1 Replacing the Fan Unit
V
CAUTION!
If a system error has occurred and the front identify/fault LED is blinking,
the error must be resolved before any additional components are added
or removed.
Make sure that all necessary power supply units are inserted and
functioning before you remove and/or install one of the fan units!
V
CAUTION!
The system can continue operating without one fan.
The defective fan must be replaced within a reasonable amount of time
(max. 2 minutes).
Figure 97: Disengaging the fan unit (a = green touch point)
Ê Press the locking button (green) to disengage the locking mechanism of the
unit handle.
PRIMERGY BX600 S2 Basic Unit
a
The Fan Unit
151
Advertisement
Table of Contents
