Table of Contents
Advertisement
Refer to the SPARC Enterprise T5140 and T5240 Servers Product Notes for a list of
required patches.
14. Load additional software from the Solaris media kit (optional).
The Solaris media kit (sold separately) includes several CDs containing software
to help you operate, configure, and administer your server. Refer to the
documentation provided with the media kit for a complete listing of included
software and detailed installation instructions.
Cabling Notes for Both Servers
Minimum cable connections for the servers:
■
■
■
■
■
Service processor management ports: There are two service processor
■
management ports for use with the ILOM service processor.
■
■
See the SPARC Enterprise T5140 and T5240 Servers Overview for more information.
6
SPARC Enterprise T5140 and T5240 Servers Installation Guide • February 2008
At least one system on-board Ethernet network connection (NET port)
The service processor serial management port (SER MGT port)
The service processor network management port (NET MGT port)
Power cables for the two system power supplies
The service processor serial management port (labeled SER MGT) uses an RJ-45
cable and is always available. This port is the default connection to the ILOM
service processor.
The service processor network management port (labeled NET MGT) is the
optional connection to the ILOM service processor. This port is not available
until you configure network settings for the service processor (through the
service processor serial management port). See
Network Management Port" on page
management port uses an RJ-45 cable for a 10/100 BASE-T connection. This
port does not support connections to Gigabit networks.
"Enabling the Service Processor
44. The service processor network
Advertisement
Table of Contents
