Connecting The Device To The Mains Voltage (Device-Dependent) - Fujitsu Siemens Computers Primergy Econel 100 Series Operating Manual

Connecting the device to the mains voltage
(device-dependent)
Device, Connecting, Device,
The device is adjusted to the mains voltage depending on the configuration level:
• On devices with a WAN component, the voltage supply is automatically
adjusted to the mains voltage.
• On devices with a voltage selector switch (sliding switch, plug-in element)
you will need to manually select the correct voltage rating.
1
100 V - 127 V
1 = Sliding voltage switchover switch
2 = Plug-in voltage switchover element
The visible value must correspond to the local mains voltage:
• 115 = 100 V to 127 V
• 230 = 200 V to 240 V
► Check the voltage setting.
► If the incorrect mains voltage is selected, push the slide switch all the way into
the other available position (1) with a pointed object.
or
► Insert a screwdriver into the notch and prise out the plug-in element,
turn it and refit it the other way round (2).
A26361-K1182-Z120-1-7619, edition 3
200 V - 240 V
2
100 V - 127 V
a
a = Notch for inserting the screwdriver
Getting started
200 V - 240 V
a
15