Table of Contents
Advertisement
System components and expansions
8.2.2 Changing the floppy disk drive
Ê
Shut down the operating system.
Ê
Switch off the server, and disconnect it from the network.
Switching off the server does not disconnect the device from the network. To completely
!
disconnect the device from the network, remove the power plug from the line voltage.
Ê
Open the server (see
Ê
Disconnect the cables from the floppy disk drive (1).
Ê
Remove the fastening screw (2) and withdraw the floppy disk drive from the bay (3).
Ê
Push the new floppy disk drive into the bay and secure it with the screw you removed earlier.
Ê
Connect the cables to the floppy disk drive again.
Ê
Close the server again (see
50
"Opening and closing the
1
"Opening and closing the
server").
2
server").
Accessible drives
3
A26361-K646-Z102-1-7619
Advertisement
Table of Contents
