Displaying Domain Information; Table 3-2 Dr Operation Commands - Fujitsu Siemens Computers SPARC Enterprise M5000 User Manual

TABLE 3-2
Command name
setdcl
setupfru
addboard
deleteboard
moveboard
The sections below describe the DR display and DR operation commands in detail
and show examples. For details of the options, operands, and usage of these
commands, refer to SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF
Reference Manual.
Note – Use of the user interfaces with XSCF shell and XSCF Web is restricted to
selected administrators, and requires administrator privileges for DR operations.
When system boards are shared by multiple administrators, the administrators must
carefully prepare and plan secure DR operations.
3.1.1

Displaying Domain Information

The showdcl(8) command displays domain information including the domain ID,
configured system board numbers, and domain status in list format.
The showdcl(8) command is used before a DR operation to determine whether the
domain status permits DR operation, and confirm the registration of the DR-target
system board in the DCL. The showdcl(8) command is also used after a DR
operation to confirm domain status and configuration.
To change domain settings or register a system board in the DCL, use the setdcl(8)
command. To change PSB settings, use the setupfru(8) command.
The following examples show the format and specifiable options of the showdcl(8)
command.
showdcl [-v] -a
showdcl [-v] -d domain_id [-l lsb ...]
showdcl -h
3-2 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User's Guide • September 2007
DR Operation Commands
Function
Update and edit the DCL.
Set the division type and memory mirror mode for a PSB.
Add a system board to a domain.
Delete a system board from a domain.
Move a system board between domains.