Configure Bgp Delete Network - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

BGP Commands

configure bgp delete network

configure bgp delete network {address-family [ipv4-unicast | ipv4-

multicast]} [all | <ipaddress/mask length>]

Deletes a network to be originated from this router.

Syntax Description

address-family

If no address family is specified, IPv4 unicast is the default.

Usage Guidelines

The following command deletes a network to be originated from this router:

configure bgp delete network 192.1.1.12/30

This command was first available in ExtremeWare XOS 10.1.

This command required an Advanced Core license in ExtremeWare XOS 11.1.

Platform Availability

This command is available on platforms with a Core or an Advanced Core license.

The address family to which the network routes will be exported. BGP supports

two address families: IPv4 Unicast and IPv4 Multicast.

Specifies all networks.

Specifies an IP network address and a netmask length.

ExtremeWare XOS 11.3 Command Reference

Do you have a question about the ExtremeWare XOS and is the answer not in the manual?

Extremeware xos 11.3