Replacing An Encryption Engine In An Encryption Group - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

20

Replacing an encryption engine in an encryption group

FIGURE 233
9. Click Finish to exit the Configure Switch Encryption wizard.
Replacing an encryption engine in an encryption group
To replace an encryption engine in an encryption group with another encryption engine within the
same DEK Cluster, complete the following steps.
1. From the Encryption Center, select the encryption engine, and select Engine > Replace, or right
540
Add switch to an encryption group - Next Steps dialog box
click on the encryption engine and select Replace.
The Engine Operations tab of the Encryption Group Properties dialog box displays
You can also display the Engine Operations tab by selecting an encryption group from the tree,
and selecting Group > Properties from the menu bar and selecting the Engine Operations tab,
or you can right-click the encryption group, select Properties and select the Engine Operations
tab.
(Figure 234).
DCFM Enterprise User Manual
53-1001775-01