Replacing An Encryption Engine In An Encryption Group - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

18
8. Note Important Next Steps! below this message, and click Next.
FIGURE 179
9. Click Finish to exit the Configure Switch Encryption wizard.

Replacing an encryption engine in an encryption group

To replace an encryption engine in an encryption group with another encryption engine within the
same DEK Cluster, complete the following steps.
1. From the Encryption Center, select the encryption engine, and select Engine > Replace, or right
502
Instructions for installing public key certificates for the encryption switch are displayed. These
instructions are specific to the key vault type. Copy or print these instructions.
Add switch to an encryption group - Next Steps dialog box
click on the encryption engine and select Replace.
The Engine Operations tab of the Encryption Group Properties dialog box displays
You can also display the Engine Operations tab by selecting an encryption group from the tree,
and selecting Group > Properties from the menu bar and selecting the Engine Operations tab,
or you can right-click the encryption group, select Properties and select the Engine Operations
tab.
(Figure
DCFM Professional Plus User Manual
53-1001774-01
180).