Creating An Skm High Availability Cluster; Copying The Local Ca Certificate For A Clustered Skm Appliance - Brocade Communications Systems Brocade 8/12c User Manual

Creating an SKM High Availability cluster

The HP SKM key vault supports clustering of HP SKM appliances for high availability. If two SKM
key vaults are configured, they must be clustered. If only a single SKM appliance is configured, it
may be clustered for backup purposes, but the backup appliance will not be directly used by the
switch. The procedures in this section will establish a cluster configuration on one SKM appliance
and then transfer that configuration to the remaining appliances.
•
•
•
To create a cluster, complete the following steps on one of the HP SKM appliances that is to be a
member of the cluster:
1. From the SKM management console, click the Device tab.
2. In the Device Configuration menu, click Cluster.
3. Select and note the Local IP address. You will need this address when you add an appliance to
4. For Local Port, use the default value of 9001 unless you are explicitly directed to use a
5. Type the cluster password in the Create Cluster section of the main window to create the new
6. Click Create.
7.

Copying the local CA certificate for a clustered SKM appliance

Before adding an SKM appliance to a cluster, you must obtain the local CA certificate from the
original SKM or from an SKM that is already in the cluster.
1. Select the Security tab.
2. Select Local CAs under Certificates & CAs.
3. Select the name of the local CA from the Local Certificate Authority list.
4. Copy the certificate request, beginning with
Brocade Network Advisor SAN User Manual
53-1002167-01
Create the cluster on one SKM appliance that is to be a member of the cluster.
Copy the local CA certificate from the first SKM appliance or an existing cluster member.
Paste the local CA certificate into the management console for each of the SKM appliances
added to the cluster.
The Create Cluster section displays.
the cluster.
different value for your site.
cluster.
In the Cluster Settings section of the window, click Download Cluster Key and save the key to a
convenient location, such as your computer's desktop. The cluster key is a text file and is only
required temporarily. It may be deleted from your computer's desktop after all SKM appliances
have been added to the cluster.
The CA Certificate Information is displayed.
with
---END CERTIFICATE REQUEST---
Steps for connecting to an SKM appliance
---BEGIN CERTIFICATE REQUEST---
. Be careful not to include any extra characters.
18
and ending
459