Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 118

JUNOSe 11.1.x Link Layer Configuration Guide
show atm subinterface
86
Monitoring ATM
--------- --- --- --------- -------
ATM 2/1 0 100
ATM 2/1 0 200
ATM 2/2 0 100
ATM 2/2 0 200
% Found 4 Entries in the system
Example 2 Displays entries on an interface
host1#show atm ping 2/1
Interface VPI VCI CellCount TimeOut
--------- --- --- --------- -------
ATM 2/1 0 100
ATM 2/1 0 200
% Found 2 Entries in this Interface
Example 3 Displays entries on a circuit
host1#show atm ping atm 2/1 0 100
Ping Cell Count
Ping Time Out
No Of Cells Sent
No Of Response Received
Success Rate
round-trip min/max/avg
Ping Status
Oam Flow Type
See show atm ping.
Use to display the current state of all ATM subinterfaces, all ATM subinterfaces
configured on a specified ATM physical interface, or a specific ATM subinterface.
To specify an ATM subinterface for ERX7xx models, ERX14xx models, and
ERX310 router, use the slot/port.subinterface format.
slot Number of the chassis slot
port Port number on the I/O module
subinterface Number of the subinterface in the range 1–2147483647
To specify an ATM subinterface for the E120 and E320 routers, use the
slot/adapter/port.subinterface format.
slot Number of the chassis slot
adapter Identifier for the IOA within the E320 chassis, either 0 or 1, where:
0 indicates that the IOA is installed in the right IOA bay (E120 router)
or the upper IOA bay (E320 router).
1 indicates that the IOA is installed in the left IOA bay (E120 router) or
the lower IOA bay (E320 router).
port Port number on the IOA
subinterface Number of the subinterface in the range 1–2147483647
------------- --------- -------
5 5 5
5 5 5
5 5 5
5 5 5
SentCellCount RespCount
------------- ---------- -------
5 5 5
5 5 5
:5
:5secs
:5
:5
:100%
:0/10/2 ms
:Completed
:Segment
5 Ping Completed
5 Ping Completed
5 Ping Completed
5 Ping Completed
Status
5 Ping Completed
5 Ping Completed