Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 643

Chapter 17: Configuring Dynamic Interfaces
the peer has not negotiated an LCP magic number: ignore (ignore the peer
magic number mismatch and retain the PPP connection), or reject (router
terminates the PPP connection if it detects a peer magic number mismatch)
PPP Peer DNS Priority Enabled or disabled
PPP Peer WINS Priority Enabled or disabled
PPP Authentication Type of authentication configured: PAP, CHAP, or none
PPP Authentication Router Name of authentication virtual router
PPP Negotiate MRU MRU configured for the profile
PPP Packet Log Enabled or disabled
PPP State Log Enabled or disabled
PPP Chap Challenge Length Minimum and maximum Chap Challenge
length
PPP Passive Mode Enabled or disabled
PPP Multilink Enabled or disabled
PPP IPCP Netmask Option Enabled or disabled
PPP IPCP Lockout Option Enabled or disabled
PPP Max-negotiations IPCP Maximum number of renegotiation attempts
that the router accepts before terminating a PPP session
PPP AAA Profile AAA profile associated with this PPP interface
PPP Multilink Fragmentation Enabled or disabled
PPP Multilink Fragment Size Multilink fragment size for this PPP interface
PPP Multilink Reassembly Enabled or disabled
PPP Multilink Mrru Multilink MRRU value for this PPP interface
PPP Hash Link Selection Hash-based link selection for a PPP interface;
enabled or disabled
PPP Initiate IP Initiation of IPv4 over this PPP interface; enabled or disabled
PPP Initiate IPv6 Initiation of IPv6 over this PPP interface; enabled or
disabled
PPP IPCP prompt-option dns Prompts the CPE (Customer Premises
Equipment) to negotiate the IPCP primary and secondary DNS options that
are locally available with the broadband remote access server; enabled or
disabled
PPPoE Max Sessions Maximum number of PPPoE subinterfaces that can
be on an interface
611
Monitoring Upper-Layer Dynamic Interfaces and Profiles