Table of Contents
Advertisement
JUNOSe 11.1.x Link Layer Configuration Guide
310
Supported MLPPP Features
When MLPPP reassembly is disabled, this restriction is not in effect; for
example, member links can span paths in different bundles.
Any combination of bundles that does not exceed the 336 available T1
channels (for example, 336 single-link T1 bundles, 42 eight-link bundles, or
41 eight-link bundles and 8 single-link bundles)
Any combination of bundles that does not exceed the 252 available E1
channels (for example, 252 single-link T1 bundles, 34 eight-link bundles, or
33 eight-link bundles and 8 single-link bundles)
On a CT3/T3-F0 line module with a CT3/T3 12 I/O module, you can configure:
Member links from different T3 ports in the same bundle
Any combination of bundles that does not exceed the 336 available T1
channels (for example, 336 single-link T1 bundles, 42 eight-link bundles, or
41 eight-link bundles and 8 single-link bundles)
On an ES2-S1 Service IOA, you can configure:
Up to 16,000 member links per line module, not to exceed a total of 12,000
MLPPP bundles per chassis
Any combination of bundles that does not exceed either of these maximums
(for example, 4000 single-link bundles, 4000 two-link bundles, 4000 four-link
bundles, and 2000 eight-link bundles)
On an OCx/STMx ATM line module and its corresponding line modules, you can
configure:
Up to 8000 member links per line module, not to exceed a total of 8000
MLPPP bundles per chassis
Any combination of bundles that does not exceed either of these maximums
(for example, 4000 single-link bundles, 4000 two-link bundles, 2000 four-link
bundles, and 1000 eight-link bundles)
On a Service line module (SM), you can configure:
Up to 16,000 member links per line module, not to exceed a total of 12,000
MLPPP bundles per chassis
Any combination of bundles that does not exceed either of these maximums
(for example, 4000 single-link bundles, 4000 two-link bundles, 4000 four-link
bundles, and 2000 eight-link bundles)
On a shared tunnel-server port configured on a GE-2 or GE-HDE line module and
corresponding line modules, you can configure:
Up to 8000 member links per line module, not to exceed a total of 8000
MLPPP bundles per chassis
Any combination of bundles that does not exceed either of these maximums
(for example, 4000 single-link bundles, 4000 two-link bundles, 2000 four-link
bundles, and 1000 eight-link bundles)
On an ES2-S1 GE-4 IOA, ES2-S1 GE-8 IOA, ES2-S1 OC3-8 STM1 ATM IOA, and
ES2-S1 OC12-2 STM4 ATM IOA modules that pair with an ES2 4G LM on E120
and E320 routers, you can configure:
Advertisement
Table of Contents
Troubleshooting
