Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 173

baseline frame-relay multilinkinterface
show frame-relay interface
You cannot set a baseline for groups of interfaces, subinterfaces, or circuits. You
must set baselines one at a time.
When baselining is requested, the time since the last baseline was set is displayed
in hours:minutes:seconds or days/hours format. If a baseline has not been set, the
message " No baseline has been set" is displayed instead.
The regular interface statistics and LMI statistics for interfaces are subject to the
same baseline timestamp. You cannot set separate baselines for these statistics.
Use the optional delta keyword with Frame Relay show commands to specify
that baselined statistics are to be shown.
Example
host1#baseline frame-relay interface mlframe-relay boston
There is no no version.
See baseline frame-relay interface.
Use to set a statistics baseline for MLFR links.
The router implements the baseline by reading and storing the statistics at the
time the baseline is set and then subtracting this baseline whenever
baseline-relative statistics are retrieved.
When baselining is requested, the time since the last baseline was set is displayed
in hours:minutes:seconds or days/hours format. If a baseline has not been set, the
message " No baseline has been set" is displayed instead.
The regular interface statistics and LIP statistics for interfaces are subject to the
same baseline timestamp. You cannot set separate baselines for these statistics.
Use the optional delta keyword with Frame Relay show commands to specify
that baselined statistics are to be shown.
Example
host1#baseline frame-relay multilinkinterface serial 3/2
There is no no version.
See baseline frame-relay multilinkinterface.
Use to display the information about the Frame Relay layer of the interface.
Use the brief keyword to display the operational status of all configured interfaces.
Use the optional delta keyword to specify that baselined statistics are to be
shown.
Field descriptions
Frame relay interface mlframe-relay Name of the MLFR bundle
Status of the major Frame Relay interface One of the following states:
Chapter 3: Configuring Multilink Frame Relay
Monitoring MLFR
141